Magnetic Plume Abatement in Steel Pelletizing: Ultra-Low Emission Compliance at 2,000,000 Nm³/h Scale with CFD-Validated Flow Field Design

door ep | jun 15, 2026 | Plume Abatement

Case Study · Industrial Emission Control How China’s largest single-unit chain-grate pelletizing line achieved visible-plume-free operation, ultra-low emission targets of 10/35/50 mg/Nm³ for PM/SO₂/NOx, and year-round compliance in a high-humidity Yangtze River...

Magnetic Plume Abatement in Glass Fiber Manufacturing: Tackling High-Temperature, High-Dust, Strongly Corrosive Kiln Off-Gas in a High-Humidity Sub-Tropical Climate

door ep | jun 15, 2026 | Plume Abatement

Case Study · Industrial Emission Control How a high-performance glass fiber manufacturer upgraded its kiln wet flue gas desulfurization system with Magnetic Plume Abatement technology — achieving invisible stack discharge and full GB 16297−1996 compliance while...

Magnetic Plume Abatement in Copper Smelting: Eliminating Acid Mist White Plume from Electrowinning Copper Plant Evaporator Off-Gas Without Alkali Reagent or Secondary Wastewater

door ep | jun 15, 2026 | Plume Abatement

Case Study · Industrial Emission Control How a Yunnan Province electrolytic copper plant generating 170 m³/day of sulfuric acid copper bleed electrolyte treated 20,000 Nm³/h of acid mist-laden evaporator steam — achieving invisible stack discharge, full GB 26132−2010...

Magnetic Plume Abatement in Antibiotic Raw Material Pharmaceutical Manufacturing: Cold-Climate Compliance for Chain-Grate Boiler Off-Gas

door ep | jun 15, 2026 | Plume Abatement

Case Study · Industrial Emission Control How a Shanxi Province antibiotic active pharmaceutical ingredient producer achieved zero visible white plume and full GB 13271−2014 compliance — deploying a graphene composite Magnetic Plume Abatement system treating...

Magnetic Plume Abatement in Lithium Carbonate Smelting: Overcoming Extreme Corrosivity, High Humidity, and Sub-Freezing Ambient Conditions

door ep | jun 15, 2026 | Plume Abatement

Case Study · Industrial Emission Control How a lithium carbonate smelter in Nanjing serving global EV battery supply chains achieved zero visible white plume and full GB 31573−2015 compliance — using a graphene composite Magnetic Plume Abatement unit treating...

Magnetic Plume Abatement in Yellow Phosphorus Manufacturing: Recovering Condensed Water While Eliminating White Plume at 800,000 Nm³/h Scale

door ep | jun 15, 2026 | Plume Abatement

Case Study · Industrial Emission Control How a yellow phosphorus producer in Sichuan Province achieved zero visible white plume, full GB 31573−2015 compliance, and meaningful water recovery from a strongly acidic, highly adhesive furnace off-gas stream — using a...